產品banner

您當前的位置 : 首 頁 > 產品中心 > BURKERT(寶德)電磁閥

產品中心 Product

聯系我們Contact Us

上海乾拓貿易有限公司

電 話:021-39526589

網址:baohuisheng.com

地 址:上海嘉定區嘉涌路99弄6號樓713室

進口寶德流量傳送器,傳送器選型

進口寶德流量傳送器,傳送器選型

  • 所屬分類:BURKERT(寶德)電磁閥
  • 瀏覽次數:
  • 發布日期:2017-08-10
  • 產品概述
  • 性能特點
  • 技術參數

進口寶德流量傳送器,傳送器選型

 上海乾拓貿易有限公司 

 企業QQ:2880626087

 電話;021-69001039

 手機;17321017802(微信)

 郵箱;17321017802@163.com

 地址:上海市嘉定區江橋嘉涌路99弄6號713室

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

Flow transmitter/ pulse divider

The electronic module Type 8022 operates either as a ? ow transmitter (only with sensors pulse "Low Power" version Type 8020, 8030, 8070) or as a pulse divider (with all versions of sensors of Type 8020, 8030, 8070). The module operates the output of the sensors, displays the ? ow value and converts it to the signal output in mA or pulse.

In operation as a ? ow transmitter, the frequency signal of the sensor is converted in a 4...20 mA signal (2-wire operation).

In operation as a pulse divider, the input frequency is converted into an adjustable output frequency.

The use of the display unit allows the switching between the two modes.

Type 8022 can be combined with...

標準,指令和如果符合以下條件,則符合EN 60529的防護等級IP65:?電纜接頭有線或空白,

或陰接頭堵塞和擰緊?密封螺母用1 Nm±20%的擰緊扭矩擰緊?外殼封閉的螺絲和緊固扭矩為0.30 Nm±20%的緊固螺釘,

或者顯示和控制模塊以0.30 Nm±20%的擰緊扭矩進行插拔和擰緊標準和指令符合UE指令的應用標準,

可以在歐盟型式檢驗和/或符合性聲明(如適用)上找到UL的UL61010-1 + CAN / CSA-C22.2 No.61010-1

美國和加拿大UL產品的特定技術數據針對內部污染污染程度2,符合EN 61010-1標準安裝類別I類別,符合UL61010-1

流量變送器/脈沖分壓器功能8022型

?微處理器控制電子設備?變送器操作:將輸入頻率轉換為4 ... 20 mA信號(2線操作)

?可擴展的4 ... 20 mA信號?脈沖分頻器操作:將輸入轉換為可調輸出頻率(3線操作)?顯示可選單元中的流量?可移動顯示單元(僅需要配置或顯示)

訂購圖表基本單位及配件

?  Microprocessor-controlled electronics ?  2-wire (4...20 mA) / 3-wire (NPN/PNP) - operation 

?  Pluggable to ? ow sensor 8020, 8030 or 8070 ?  Removable display unit

Technical data Power supply 12...30 V DC, ? ltered and regulated, 

SELV (safety extra low voltage) circuit with a non dangerous energy level Voltage tolerance ±10 % Residual ripple < 5 % Power consumption max. Flow transmitter (4...20 mA output, 2-wire operation) Pulse divider (NPN/PNP output, 3-wire operation) 0.6 W 3.2 W with 

? 0.2 W from the device ? 1.5 W max. from the ? ow sensor* ? 1.5 W max. 

from the PNP/NPN output* Ambient temperature -10...+60°C Frequency input 1...600 Hz 4...20 mA output Accuracy ±1.5% of full scale max. loop impedance: 1000 Ω at 30 V DC ; 700 Ω at 24 V DC; 100 Ω at 12 V DC NPN/PNP output Accuracy ±1% of measured value 1...600 Hz, "open collector",

 max. 50 mA Electrical connection Terminal strip 4 pins or male M12 connector Housing material Polyamide / PC

編號。 流量變送器/脈沖分壓器8022型無顯示單元PG連接No 215 644流量變送器

/脈沖分壓器8022型顯示單元PG連接No 215 645流量變送器/脈沖分壓器8022型無顯示單元PG連接識別563 223流量變送器

 /脈沖分頻器8022型顯示單元,PG連接識別563 224流量變送器/脈沖分頻器8022型無顯示單元

,公型M12連接器No 215 646流量變送器/脈沖分頻器8022型顯示單元,公型M12連接器No 215 647顯示單元

 對于8022型號562 876封套(用于不帶顯示單元的操作)否670 549直角內螺紋M12連接器,4針否784 301直母M12連接器,4針,5米電纜否918 038

8022 型電子設備模塊可被作用流量傳送器(僅帶有“Low Power”式脈沖傳感器,型號為 8020、8030 和 8070)或脈沖分配器

(帶有所有樣式的傳感器,型號 8020、8030 和 8070)。模塊會處理傳感器的輸出信號,顯示測得的流量并以 mA 為單位或以脈沖的形式將其發送到信號輸出端上。

作為流量傳送器運行時,傳感器的頻率信號會被轉換成一個 4 - 20 mA 信號(雙線運行)。

作為脈沖分配器運行時,輸入頻率會被轉換成一個可調節的輸出頻率。通過操作單元,可在兩種運行模式之間進行切換。

受微型控制器控制的電子設備

雙線 (4-20 mA)/三線 (NPN/PNP) - 運行

可插接到流量傳感器 8020、8030 或 8070 上

可拆除的操作單元

進口寶德流量傳送器,傳送器選型

標簽

近期瀏覽:

在線客服